homepage  Research  Publications  2015
 
S. G. Zhang, X. M. Ni, M. Zhao, J. J. Feng and R. F. Zhang (2015) Journal Of Thermal Analysis And Calorimetry 119 2291-2303.
Date: 2016-02-24   Author: SKLFS  ,   Source: SKLFS  ,
 

S. G. Zhang, X. M. Ni, M. Zhao, J. J. Feng and R. F. Zhang (2015) Numerical simulation of wood crib fire behavior in a confined space using cone calorimeter data. Journal/Journal Of Thermal Analysis And Calorimetry 119 2291-2303. [In English]
Web link: http://dx.doi.org/10.1007/s10973-014-4291-4
Keywords: Wood crib, FDS, Cone calorimeter, Heat release rate, Flame temperature, Oxygen concentration, COMBUSTION, MODEL, FLAMES, HEAT, FDS
Abstract: The simulation of wood crib fire behavior in a confined space with fire dynamics simulator (FDS) was presented in this paper, including the heat release rate, flame temperature, central temperature of crib, and oxygen concentration. In the simulation, the cone calorimeter data, such as ignition temperature and heat release rate of wood material measured from cone calorimeter test, were inputted into FDS. Simulations were compared with the results of practical wood crib burning experiments. The simulation results shown that the inputted heat release rate data from cone calorimeter tests obtained with different external heat flux (35-50 kW m(-2)) had little influence on the simulation results. The heat release rates were in good agreement with the experimental measurement with the biggest difference of 13.9 % in peak value. FDS underestimated the flame temperatures at lower positions about 10 % during the steady state, and the difference between simulation and experiment in flame temperature decreased as the height of measurement position increased. Although there was a big difference in decay phrase, the temperatures in the middle of wood crib were successfully simulated for the overlapped curves during (I) Fast growth stage and (II) Moderate growth stage of burning. The oxygen concentrations were overestimated because the oxygen concentrations measured at the height of 1.8 m in the space were higher than the experimental data with an average difference of 15.5 %. On the whole, an effective way was provided with reasonable results to study the burning characteristics of wood crib fire with numerical simulation.

 ,

 
Print    Close
 
 
   
  
 
Relevant link
Contact us
State Key Laboratory of Fire Science, University of Science and Technology of China
Jinzhai Road 96, Hefei, Anhui, P. R. China
P. O.: 230026
   
Tel:(+86)551 63601651
Fax:(+86)551 63601669
E-mail:sklfs@ustc.edu.cn
 
 
Copyright © 1990-2011 State Key Laboratory of Fire Science, University of Science and Technology of China
Tel:(+86)551 3601651 | Fax:(+86)551 3601669 | E-mail:sklfs@ustc.edu.cn | ICP: D20380176