Z. Li, X. D. Cheng, S. He, D. M. Huang, H. J. Bi and H. Yang (2014) Materials Letters 129 12-15. |
|
|
Date: 2015-03-29
Author: SKLFS  , Source: SKLFS  ,
|
|
Z. Li, X. D. Cheng, S. He, D. M. Huang, H. J. Bi and H. Yang (2014) Preparation of ambient pressure dried MTMS/TEOS co-precursor silica aerogel by adjusting NH4OH concentration. Journal/Materials Letters 129 12-15. [In English] Web link: http://dx.doi.org/10.1016/j.matlet.2014.05.024 Keywords: ,Silica aerogel, Sol-gel preparation, Co-precursor, Ambient pressure, drying, Porous materials, SURFACE CHEMICAL-MODIFICATION, METHYLTRIMETHOXYSILANE, INSULATION Abstract: Using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as co-precursors, hybrid silica aerogels were prepared via ambient pressure drying (APD) without further surface modification. Due to various precursors presenting different condensation rates, the effect of NH4OH used as catalyst was explored in detail to balance the condensation rates of the precursors. Several aspects including volume shrinkage, density, specific surface area, microstructure and thermal stability were characterized to confirm the optimal condensation condition. It was found that the sizes of primary particles and clusters of SiO2 increased at first and then decreased with the NH4OH concentration, which impacts the other characteristics of the samples seriously. At optimum, the samples achieved low density 0.107 g/cm(3), high porosity 95.1%, specific surface area 705.6 m(2)/g and thermostability up to approximately 435 degrees C. (C) 2014 Elsevier B.V. All rights reserved.
|
|
|
|
|
|
|
|
|
|
|
State Key Laboratory of Fire Science, University of Science and Technology of China
Jinzhai Road 96, Hefei, Anhui, P. R. China
P. O.: 230026 |
|
|
|
Tel:(+86)551 63601651 |
|
Fax:(+86)551 63601669 |
|
E-mail:sklfs@ustc.edu.cn |
|
|
|
|
|