homepage  Research  Publications  2014
 
X. P. Liu and J. L. Niu (2014) Applied Energy 129 364-372.
Date: 2015-03-29   Author: SKLFS  ,   Source: SKLFS  ,
 

X. P. Liu and J. L. Niu (2014) An optimal design analysis method for heat recovery devices in building applications. Journal/Applied Energy 129 364-372. [In English]
Web link: http://dx.doi.org/10.1016/j.apenergy.2014.05.024
Keywords: ,Heat recovery, Building application, Optimal design, Performance, analysis, PERFORMANCE EVALUATION CRITERIA, TRANSFER SURFACES, ENERGY RECOVERY, EXCHANGER DESIGN, MASS-TRANSFER, FLUID-FLOW, AIR, FIN, GENERATION, DUCTS

Abstract: Air-to-air heat recovery system is widely used in building applications to reduce the energy used for conditioning the fresh air. The heat exchanger core geometry is one of the key factors that affect the overall performance of a heat recovery system. To better guide the development of high performance heat exchangers in building applications, a new analysis method is proposed in this work from the practical application point of view. The objective of the new optimization method is: at any given mass flow rate, temperature difference and desired heat recovery effectiveness, to minimize the material cost at a specified fan energy use, or alternatively, to minimize the fan energy use at a given material cost. Different duct geometries are analyzed together with the classical j/f factor method: equilateral triangle (Tri), circular (Cyl), square (Squ), rectangle with aspect ratio 1/2 (Rec(1/2)), 1/4 (Rec(1/4)), and 1/8 (Rec(1/8)). A novel channel structure named cross-corrugated triangular (CCT) duct is also considered for comparison. From the energy saving point of view, under the same hydraulic diameter, the pumping power requirements for Rec(1/8) are the lowest when compared with the other shapes in the laminar flow region, while the pumping power requirements for CCT duct are the highest, indicating larger energy consumptions when using such structure. Conversely, with a specified fan power consumption, the required total surface area of Rec(1/8) are the smallest, which means that a parallel plate channel is the best geometry from the material saving point of view. By employing this method, the manufacturing and operating cost can be considered synthetically for achieving an optimal design. The proposed method can be used to select target-oriented high performance heat recovery core geometry for desired heat recovery performance, resulting in reduced space, weight, support structure, energy requirement and lifetime cost. (C) 2014 Elsevier Ltd. All rights reserved.

 
Print    Close
 
 
   
  
 
Relevant link
Contact us
State Key Laboratory of Fire Science, University of Science and Technology of China
Jinzhai Road 96, Hefei, Anhui, P. R. China
P. O.: 230026
   
Tel:(+86)551 63601651
Fax:(+86)551 63601669
E-mail:sklfs@ustc.edu.cn
 
 
Copyright © 1990-2011 State Key Laboratory of Fire Science, University of Science and Technology of China
Tel:(+86)551 3601651 | Fax:(+86)551 3601669 | E-mail:sklfs@ustc.edu.cn | ICP: D20380176