homepage  Research  Publications  2014
 
B. H. Yuan, C. L. Bao, L. Song, N. N. Hong, K. M. Liew and Y. Hu (2014) Chemical Engineering Journal 237 411-420.
Date: 2015-03-24   Author: SKLFS  ,   Source: SKLFS  ,
 

B. H. Yuan, C. L. Bao, L. Song, N. N. Hong, K. M. Liew and Y. Hu (2014) Preparation of functionalized graphene oxide/polypropylene nanocomposite with significantly improved thermal stability and studies on the crystallization behavior and mechanical properties. Journal/Chemical Engineering Journal 237 411-420. [In English]
Web link: http://dx.doi.org/10.1016/j.cej.2013.10.030
Keywords: Functionalized graphene oxide, Polypropylene, Thermal stability, Mechanical properties, beta-Nucleating agent, Orientation parameter, GRAPHITE-POLYPROPYLENE NANOCOMPOSITES, FLAME-RETARDANT PROPERTIES, POLYMER NANOCOMPOSITES, EXFOLIATED GRAPHENE, GREEN APPROACH, EPOXY-RESIN, OXIDE, COMPOSITES, REDUCTION, BLENDS

Abstract: A novel approach to fabricate covalently functionalized graphene oxide (fGO)/polypropylene (PP) nanocomposites has been reported. Graphene oxide is modified with p-phenylenediamine and cyanuric chloride and then grafted with maleic anhydride grafted polypropylene (MAPP). The fGO achieves good dispersion with exfoliated and intercalated nanostructure and strong interfacial adhesion in PP. A significant enhancement of thermal stability of the nanocomposites is obtained at low fGO loading, such as a 133 degrees C increase in initial decomposition temperature and a 94 degrees C increase in the temperature at maximum rate of weight loss in the nanocomposite with 1 wt% of fGO. The mechanisms for improving the thermal stability are fully demonstrated. The high content of fGO (1 wt%) can act as a beta-nucleating agent for PP crystallization. The addition of only 0.5 wt% fGO increases the storage modulus and heat deflection temperature (HDT) of PP by 15.4% and 11 degrees C, respectively. However, the elongation at break of nanocomposites are decreased and the value of tensile strength show no change with increasing loading of fGO, which is in contrary to those of the nanocomposites as expected. The orientation parameters of samples before and after stretching are studied to illustrate the mechanism. The reduction of mobility of lamellae by fGO is the main reason for the decrease in ductility. The possible mechanism for tensile strength is presented. The orientation of polymer chains and lamellae with respect to the direction of action of the force during deformation are inhibited in the presence of fGO. (C) 2013 Published by Elsevier B.V.

 
Print    Close
 
 
   
  
 
Relevant link
Contact us
State Key Laboratory of Fire Science, University of Science and Technology of China
Jinzhai Road 96, Hefei, Anhui, P. R. China
P. O.: 230026
   
Tel:(+86)551 63601651
Fax:(+86)551 63601669
E-mail:sklfs@ustc.edu.cn
 
 
Copyright © 1990-2011 State Key Laboratory of Fire Science, University of Science and Technology of China
Tel:(+86)551 3601651 | Fax:(+86)551 3601669 | E-mail:sklfs@ustc.edu.cn | ICP: D20380176