homepage  Research  Publications  2010
 
Ding YB, Sun JH, He XC, Wang QH, Yin Y, Xu Y, Chen XF (2010) Chinese Science Bulletin 55(34), 3954-3959.
Date: 2011-08-15   Author: SKLFS  ,   Source: WOS  ,
 
Ding YB, Sun JH, He XC, Wang QH, Yin Y, Xu Y, Chen XF (2010) Flame propagation characteristics and flame structures of zirconium particle cloud in a small-scale chamber. Chinese Science Bulletin 55(34), 3954-3959. [In English]

Web link: http://dx.doi.org/10.1007/s11434-010-4140-1

Keywords:

zirconium particle cloud, propagation characteristics, flame structure, flame temperature, dust explosions, pulverized fuel, combustion, ignition, explosibility, mechanisms, mixtures, behavior, hazard, oxygen

Abstract: Flame propagating through zirconium particle cloud in a small-scale vertical rectangle chamber was investigated experimentally. In the experiments, the zirconium quoted 99% purity was used and the diameter of particles was distributed 1-22 mu m. The zirconium dust was dispersed into the chamber by air flow and ignited by an electrode spark. A high-speed video camera was used to record the images of the propagating flame. Micro-thermocouples, schlieren optical system and microscopic lens were used to obtain temperature profiles and flame structure, respectively. Based on the experimental results, flame propagation characteristics and flame structure of zirconium particle cloud were analyzed. The propagation velocity of the flame is quite slow in the initial 14 ms and then accelerates to maximum value. Subsequently, the propagation velocity of the flame almost keeps constant. The combustion zone width of zirconium particle cloud is 5-6 mm. Smaller particles burn mainly at the leading edge of combustion zone in the width of 1.4 mm followed by larger particles burning 1.4-6 mm behind the leading edge of the combustion zone. Gas phase flame is not seen in zirconium particle cloud and the combustion time of single zirconium particle is 1-5 ms, which depends on its original size. The preheated zone is 7-8 mm thickness ahead of the combustion zone and intensive chemical reaction takes place at 490 K. The maximum flame temperature increases at lower concentrations, reaches the maximum value, and then decreases slightly at higher concentrations.

 
Print    Close
 
 
   
  
 
Relevant link
Contact us
State Key Laboratory of Fire Science, University of Science and Technology of China
Jinzhai Road 96, Hefei, Anhui, P. R. China
P. O.: 230026
   
Tel:(+86)551 63601651
Fax:(+86)551 63601669
E-mail:sklfs@ustc.edu.cn
 
 
Copyright © 1990-2011 State Key Laboratory of Fire Science, University of Science and Technology of China
Tel:(+86)551 3601651 | Fax:(+86)551 3601669 | E-mail:sklfs@ustc.edu.cn | ICP: D20380176